APP Boot Thingy 5 stars

LoopPad

A live looping app for the MPC Sample with synchronized four- or eight-loop layouts, waveform displays, input recording and per-loop mixing.

Screenshots (1)

Images: from larsoholm/LoopPad

About

LoopPad is an experimental open-source fixed-length live looper for the Akai MPC Sample.

It runs directly on the MPC Sample and turns the hardware into a pad-driven live looping instrument using the built-in display, RGB pads, microphone/rear inputs, knobs, fader, and hardware level meters.

Status: experimental development software. The current development line is v0.6.0, adding a selectable 4-loop / 8-loop layout. The 4-loop workflow is the more heavily tested baseline.

What LoopPad does

LoopPad is designed around a simple workflow:

  1. Configure loop slots in SETUP mode.
  2. Choose a per-pad length from 1 to 8 bars.
  3. Switch to LIVE mode.
  4. Arm a pad and record from the built-in microphone or rear input.
  5. LoopPad records the configured length and immediately plays it back in sync.
  6. Mix, stop, restart, clear, and combine independent loops from the MPC hardware.

Something wrong or missing on this page?

Opens GitHub's editor; your change becomes a pull request and you're credited as a contributor.