TOOL SD card 4 stars dsb-boot-v1.0.1

HenrySkillz D.S.B Boot

A boot menu for the MPC Sample. Keep Stock, stock with three HS effects, and other installed systems on one SD card, then choose a setup with the encoder at startup.

About

A free SD-card boot menu for the MPC Sample. Before anything starts, a menu on the Sample's screen lets you run Stock, HS FX (stock with three HS effects: Para EQ, Tube Strip and Saturator), or any other OS built for the Sample from one card.

Turn the data encoder to browse, push to boot. Left alone, it starts the last system you used after a five-second countdown. SHIFT + turn switches between the Records and SD card themes. If a system crashes twice in a row, the next power-on defaults to Stock.

Install by putting the autorun folder from dsb-boot-card.zip straight on the SD card. Drop other OS folders into autorun/os/ to add them to the menu.

Full walkthrough: D.S.B guide — Boot.

Recent releases

  • dsb-boot-v1.0.1 D.S.B Boot v1.0.1 Nov 18, 2026
    Release on GitHub ↗
    Release notes

    Fix: SD Card Access no longer says 'SD card is busy' when an OS was started from the boot menu. Swap your autorun folder for this one; your os/ folders stay as they are.

  • dsb-boot-v1.0.0 D.S.B Boot v1.0.0 Nov 17, 2026
    Release on GitHub ↗
    Release notes

    D.S.B Boot: a free boot menu for the MPC Sample. One card, multiple setups, picked on the Sample's screen at power-on.

    • HS FX: stock firmware with three HS effects added to the Knob FX list: HS Para EQ, HS Tube Strip and HS Saturator. No SampQOL needed.
    • Any OS: copy an OS's unchanged release autorun folder into autorun/os/ and rename it. It shows on the menu. You bring your own copy from its author.
    • Stock: Akai's firmware, untouched.

    Install

    1. Back up your SD card.
    2. Download dsb-boot-card.zip and unzip it.
    3. Copy the autorun folder to the top level of an exFAT card.
    4. Put the card in the MPC and switch on.

    Turn the data encoder to browse, push to boot. SHIFT + turn switches theme. Full guide: https://www.henryskillz.com/dsb-guide

    Tested: cold boot on Henry's own MPC Sample (firmware 1.3.0.12) on 18 Nov 2026. Every unit and card is different, so back up first and report anything odd.

    SHA-256: c83511782f803a20a7524df79c77aa3f2d4563c101657d3094e722ddd44647cf

    Third-party OS support follows SampleBoot by Alessandro "Paxi" D'Esposito (MIT). Notices are in autorun/boot/NOTICE.txt.

    Unofficial. Not made, endorsed or supported by Akai Professional or inMusic. Pull the card and the Sample is stock again.

Something wrong or missing on this page?

Opens GitHub's editor; your change becomes a pull request and you're credited as a contributor.